Raised dog bowls can provide health benefits to your dog and aesthetic benefits for your home. There are multiple ways to build a raised dog bowl with reusable and environmentally friendly materials. Reclaimed wooden pallets are versatile and environmentally friendly building materials. Upcycling these pallets, instead of buying virgin wood, helps reduce the market for more timber harvesting.
Before you start to build your raised dog bowl, you’ll need to decide which dog bowl you want to use and where you want your stand to be placed. Pick a quiet corner in your home where there isn’t busy foot traffic and your dog can eat peacefully.
This article contains affiliate links. If you purchase an item through one of these links, we receive a small commission that helps fund our Recycling Directory.
Reclaimed Pallet Raised Dog Bowl
Dog trainer and author, John Woods from All Things Dogs created this simple and easy-to-follow design for a DIY raised dog bowl stand. To start, find a wooden pallet that’s safe, and, ideally, free.
To find free pallets, look at local stores, food markets, DIY stores, or Craigslist. To make sure your pallets are safe, inspect their IPPC stamp; this is a stamp branded onto the pallet that shows a pallet treatment code. Make sure this code doesn’t contain the letters MB (methyl bromide), which is toxic to pets. Look for pallets with the codes DB (debarked and untreated) or KD (kiln-dried and untreated).
Once you have sourced your pallet, let’s look at the materials and tools you’ll need.
- 2 reclaimed standard pallets
- 1 stainless steel dog bowl (10” diameter)
- 1 pack of 50 x 1.5” oval nails
Break Down Your Pallets
Grab a hammer and start dismantling the pallet’s base by removing the chocks. Pry the top planks from the pallet using your claw hammer. If any planks break, are rotten, or are otherwise unsuitable, place them aside. Once you have removed the top planks, pull out the nails and repeat this process until you have around 10 planks.
Prepare the Planks
In this example, I’m using a 10-inch diameter dog bowl, so I measured 14 inches along two of the six planks, drew cut lines (using a carpenter’s square), and cut them to size using a handsaw. Repeat this process; however, this time use 13 inches as the measurement. Now, using two off-cuts from your pallet, cut two 13-inch support beams. You should end up with six planks, two measuring 14 inches and four measuring 13 inches.
Build the Stand
Now that your planks are cut to measure, you can build the stand. Start by nailing the 13-inch width planks into the off-cut 13-inch support planks — this will double the width of the original planks. Then nail the 14-inch length planks into the width planks to create a square. Once all of the panels have been nailed together, you will have the base. Test to make sure your bowl fits.
Fix Top Planks to Base
Using the remaining planks from the original pallets, cut five planks to measure 15 inches long; this allows for a small overhang. Dry fit the five planks to make sure they are level and plumb and then nail each plank to the base. Finally, place your dog bowl upside down on the finished top, center it, and draw around the bowl. Use this guide to cut out the center piece where the bowl will fit.
Once finished, you can sand, decorate, and clean your raised dog bowl stand, and your lucky dog can eat dinner in a more comfortable position.
Feature image courtesy of John Woods, All Things Dogs
About the Author
Editor of All Things Dogs, dog lover John Woods is a member of the Association of Professional Dog Trainers, recognized author by the Dog Writers Association of America, and a dog-parent to two rescue dogs.
This article was originally published on January 25, 2019.
Need Seeds? Visit a Seed Library
Earth911 Podcast: NAPCOR Study Suggests PET Bottles Are More Sustainable Than Metal & Glass
Earth911 Podcast: Earth Day’s Michael Karapetian on Participating in the Great Global Cleanup 2023